Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Furnace Replacement Cost in Fort Worth?
A full furnace replacement in Fort Worth typically costs between $4,200 and $8,900 in 2026, with most single-family homes landing in the $5,000 to $7,500 range depending on furnace efficiency, brand, and the condition of existing ductwork or venting. High-efficiency models (90%+ AFUE) typically run $6,000 to $9,500 installed, while a budget-conscious mid-efficiency replacement can start around $3,800 for a smaller single-story home. These are installed prices including labor, permits, and haul-away of the old unit in the Fort Worth market.
Key Takeaways
- Most Fort Worth furnace replacements cost $4,200 – $8,900 installed.
- Mid-efficiency (80% AFUE) units are the most common choice in older Tarrant County homes: $3,800 – $5,500.
- High-efficiency (90 – 97% AFUE) furnaces cost more upfront but cut gas bills by 15 – 30% annually.
- Brand, home size, and existing ductwork are the three biggest price drivers.
- Meadowsweet Heating and Air provides a written price before any work starts, on every visit.
Furnace Replacement Cost Breakdown (2026)
Furnace replacement pricing in Fort Worth breaks down into equipment, installation labor, and the small extras most homeowners forget to budget for: permits, disposal fees, and any ductwork or venting adjustments. Here’s what families in Tarrant County can expect to see on a written quote.
| Cost Component | Typical Fort Worth Range | Notes |
|---|---|---|
| Mid-efficiency furnace (80% AFUE) | $1,800 – $3,200 | Common in older Fort Worth homes with existing metal flue |
| High-efficiency furnace (90 – 97% AFUE) | $3,200 – $5,800 | Requires PVC venting; best for newer homes or when replacing aging ductwork |
| Installation labor | $1,200 – $2,500 | Includes gas line connection, electrical hookup, and startup testing |
| Permits & city inspection | $150 – $450 | Fort Worth requires a mechanical permit for furnace replacement |
| Old unit removal & disposal | $100 – $250 | Usually included by full-service companies; confirm on your quote |
| Ductwork repairs or transition | $300 – $2,000+ | Not always needed; common in pre-1980 Fort Worth homes |
| Typical total installed | $4,200 – $8,900 | Full replacement, single furnace, average 1,800 – 2,600 sq ft home |
What moves the price up or down? Home size is the biggest factor. A 1,200-square-foot bungalow in Fairmount with a 60,000 BTU furnace will cost far less to replace than a 3,400-square-foot two-story in Walsh Ranch needing a 100,000+ BTU system. The second big driver is efficiency: an 80% AFUE furnace is cheaper to buy, but a 96% AFUE unit qualifies for utility rebates and costs less to run every winter. Third is ductwork condition. In older neighborhoods like Mistletoe Heights and Ryan Place, homes built before 1970 often have undersized or leaky ducts that need modification when a new furnace is installed.
What Affects Furnace Replacement Pricing in Fort Worth
- Home size and furnace BTU rating. Furnaces are sized in BTUs. A 60,000 BTU unit for a 1,200-square-foot home costs less than a 100,000 BTU unit for a 3,000-square-foot home. Oversizing or undersizing is a real problem in Fort Worth’s climate swings, and a proper load calculation matters.
- Efficiency rating (AFUE). An 80% AFUE furnace converts 80% of fuel to heat; a 96% AFUE unit converts 96%. The higher-efficiency units cost $1,500 – $3,000 more upfront but can save $150 – $400 per year on gas in North Texas winters, especially during hard freezes like the one we saw in February 2021.
- Brand selection. Carrier, Trane, and Lennox tend to run $300 – $1,000 higher than comparable Goodman, Rheem, or Bryant models of the same size and efficiency. The difference isn’t always about reliability; it’s often parts availability and warranty terms. Meadowsweet services all nine leading brands including Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard.
- Ductwork and venting condition. Replacing a mid-efficiency furnace with a high-efficiency model usually requires new PVC venting through a side wall, not the existing metal chimney. If the ducts are leaking (common in Fort Worth’s clay soil areas where foundation movement cracks duct joints), the quote will include repairs.
- Existing thermostat and wiring. Smart thermostats like Ecobee or Nest often require a C-wire. If your older Fort Worth home doesn’t have one, expect a small wiring addition, typically $100 – $250.
- Time of year. Demand peaks in Fort Worth during November through February. Same-week installation is routinely available outside of those months, and some manufacturers run fall rebates that can trim $200 – $500 off equipment costs.
Is It Cheaper to Repair or Replace a Furnace in Fort Worth?
If the repair is a single component like a flame sensor, ignitor, or capacitor, repair is almost always the better choice: those jobs run $150 – $450. But if the unit is 15+ years old and the heat exchanger has failed or the blower motor is going, replacement usually makes more sense. A heat exchanger replacement on a 15-year-old furnace in Fort Worth can cost $1,500 – $2,800, and spending that on an aging system rarely pays off.
Here’s the rule of thumb our technicians use with families across Fort Worth: multiply the repair cost by the age of the furnace. If the result is over $5,000, replacing is almost always the smarter long-term move. So a $600 repair on a 12-year-old furnace equals $7,200. That’s money better put toward a new system with a clean warranty.
Luis Serrano, who leads Meadowsweet Heating and Air Fort Worth, puts it this way: a furnace is a long-term fixture in your home, not a repeated expense. The goal is to give families the straight numbers so they can decide without pressure.
How Much Does Furnace Replacement Cost by Efficiency Level?
80% AFUE (Standard Efficiency)
Installed cost in Fort Worth: $3,800 – $5,500. These furnaces vent through a metal flue or chimney, which works well in older homes that already have that infrastructure. They’re the most budget-friendly option, but they waste about 20 cents of every gas dollar.
90 – 95% AFUE (High Efficiency)
Installed cost in Fort Worth: $5,200 – $7,500. These units use sealed combustion and PVC venting, which also improves indoor air quality because they don’t pull air from inside the house. For families with kids or allergy concerns, that’s a meaningful difference.
96 – 97% AFUE (Ultra High Efficiency)
Installed cost in Fort Worth: $6,500 – $9,500. These are top-of-the-line systems with modulating burners and variable-speed blowers that keep temperatures almost perfectly even throughout the home. The comfort difference in a two-story Fort Worth home is noticeable, especially in January cold snaps.
How Much Does Furnace Replacement Cost in Fort Worth by Home Size?
These ranges assume standard 8-foot ceilings and a furnace properly sized by a load calculation. Homes with vaulted ceilings or under-insulated attics may need a larger unit than the square footage suggests.
- Up to 1,200 sq ft: $3,800 – $5,200 (typically 45,000 – 60,000 BTU)
- 1,200 – 1,800 sq ft: $4,500 – $6,800 (typically 60,000 – 80,000 BTU)
- 1,800 – 2,600 sq ft: $5,000 – $7,800 (typically 80,000 – 100,000 BTU)
- 2,600 – 3,500+ sq ft: $6,500 – $9,500 (typically 100,000 – 120,000 BTU)
For a detailed walkthrough of what the installation process looks like in your home, see our guide to Furnace Replacement in Fort Worth.
How to Save on Furnace Replacement in Fort Worth
Saving on a furnace replacement doesn’t mean cutting corners. It means buying the right equipment for your home and timing the purchase thoughtfully.
- Get a proper load calculation, not a rule-of-thumb quote. An oversized furnace costs more to buy and runs less efficiently. A correctly sized furnace saves money on day one and every winter after.
- Ask about manufacturer rebates. Carrier, Trane, Lennox, and Goodman regularly run fall rebates of $200 – $800 on high-efficiency equipment. The rebate depends on the season, so it’s worth asking what’s active when you call.
- Check for utility incentives. Atmos Energy and Oncor occasionally offer rebates for high-efficiency furnace installations in Tarrant County. These programs change year to year, but a quick check before you buy can trim a few hundred dollars off the total.
- Replace before peak season. November through February is the busiest time for furnace work in Fort Worth. If you can plan for October or March, you’ll have more scheduling flexibility and access to off-season pricing.
- Bundle thermostat and air filtration upgrades. If you’re already replacing the furnace, adding a smart thermostat or media filter cabinet at the same time costs less than doing it separately later.
- Plan for ductwork costs up front. If your ducts need work, the quote will include it. Knowing that number early prevents a surprise line item mid-installation.
The simplest way to know your number? Call Meadowsweet at (682) 610-2888 for a free estimate. You’ll get a written price before any work starts, so there’s no guessing and no pressure.
What the Furnace Replacement Process Looks Like
If you’ve never replaced a furnace before, it’s helpful to know what the day will actually look like. Here’s the step-by-step process families in Fort Worth can expect when working with Meadowsweet.
- Home visit and load calculation. The technician measures the conditioned square footage, checks existing ductwork, inspects the gas line and electrical service, and runs a Manual J load calculation to confirm the right furnace size. This visit is free. With Meadowsweet, every visit includes a written price before any work starts.
- Written quote with line-item details. The quote lists equipment, efficiency rating, installation labor, permit fees, and any ductwork transition needed. No vague “furnace and install” single line, at least not from us. The price is the price.
- Permit and scheduling. Fort Worth requires a mechanical permit for furnace replacement. We handle the permit paperwork with the city and schedule the installation on a day that works for your family’s routine.
- Installation day. The crew arrives in uniform, puts on shoe covers before entering, and lays drop cloths from the entry door to the furnace closet or attic access. If you have kids or pets, the crew works around nap times and keeps tools and materials organized. Luis Serrano has built the team around the C.A.R.E. values: Clean up like it’s their own home, Ask before moving anything, Respect the family’s time and quiet hours, and Explain the price before the work.
- Startup, testing, and walkthrough. The new furnace is fired up and tested for proper gas pressure, airflow, and temperature rise. The technician walks you through the thermostat settings and shows you the filter location.
- Clean-up and photo confirmation. Before leaving, the crew vacuums and tidies the work area and takes a photo of the finished job. That photo is sent to you before the crew pulls out of the driveway.
Every furnace replacement is backed by the 365-Day Done Right Promise. If anything isn’t done right within a year of installation, Meadowsweet makes it right. No runarounds, no fine print.
Why Families in Fort Worth Choose Meadowsweet Heating and Air
Meadowsweet Heating and Air is part of the Cedarwell family of HVAC companies, founded in 2004. The name itself carries an intention: meadowsweet was once strewn on floors to keep rooms fresh. That standard carries through every visit, every quote, and every installation.
When the crew works in your home, three things are non-negotiable: a written price before any work begins, shoe covers and drop cloths to protect your floors, and a photo of the clean-up before they leave. If you have a baby sleeping, a dog that gets anxious around strangers, or a home office that can’t be disturbed, the crew works around it. That’s the Cedarwell Care Promise in practice.
The company services nine leading equipment brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. That means a straightforward replacement on almost any existing system, without the “we only work on our brand” limitation some Fort Worth homeowners run into.
And when you call, a live person answers. Twenty-four hours a day, seven days a week. Nights, weekends, holidays. No voicemail queue, no automated phone tree.
Local Fort Worth Considerations
Fort Worth’s climate is hard on furnaces in ways homeowners don’t always anticipate. We get long stretches of mild weather where the furnace barely runs, followed by sudden hard freezes that demand full output for days at a time. That start-stop pattern is harder on heat exchangers and ignitors than the steady winter demand seen further north.
The clay soil under much of Tarrant County also plays a role. Foundation movement is common in neighborhoods like Wedgwood, Arlington Heights, and Stop Six, and shifting foundations can crack duct joints and throw furnace airflow out of balance. If a furnace replacement quote in one of these areas includes duct sealing or transition work, that’s not an upsell. It’s the difference between a system that heats evenly and one that leaves the back bedroom cold.
Fort Worth’s municipal code requires a mechanical permit and inspection for furnace replacement. Some companies skip the permit to keep the price low. With Meadowsweet, permits are handled correctly and included in the quote. That protects the homeowner’s insurance and resale value.
FAQs – Furnace Replacement Cost
How much does a furnace replacement cost in Fort Worth?
Most furnace replacements in Fort Worth cost between $4,200 and $8,900 installed in 2026. The final number depends on furnace size (BTU rating), efficiency level, brand, and whether ductwork needs modification. For an exact quote on your home, call Meadowsweet at (682) 610-2888. Estimates are free, and you’ll get a written price before any work starts.
How much does it cost to replace a furnace and AC together in Fort Worth?
A full furnace and AC replacement package in Fort Worth typically runs $7,500 to $14,000 depending on system efficiency and home size. Replacing both at once usually saves $500 – $1,500 compared to doing them separately, because labor and permitting overlap. It also means both systems share a matched efficiency rating, which maximizes comfort and energy savings.
What’s the cheapest furnace replacement option in Fort Worth?
The most affordable option is an 80% AFUE furnace in the 45,000 – 60,000 BTU range, which typically runs $3,800 – $5,000 installed for a smaller home. It’s not the most efficient choice, but for a starter home or a property that’s being sold soon, it gets the job done at the lowest upfront cost. Financing options can make even high-efficiency systems workable. Call (682) 610-2888 to talk through what fits your budget.
How long does a furnace replacement take?
Most single-family furnace replacements in Fort Worth are completed in one day, typically 5 to 8 hours. Larger homes, two-story systems with ductwork modifications, or installations involving chimney liner replacement can take a day and a half. With Meadowsweet, the crew lays drop cloths and works around your family’s schedule, including quiet hours for kids and pets.
Is it cheaper to repair or replace a furnace?
A repair under $500 on a furnace less than 10 years old is usually the cheaper choice. But a repair over $800 on a furnace 12 years or older often signals that replacement is the better long-term investment. The clearest way to decide: call (682) 610-2888 for a free diagnostic and honest recommendation. We’ll give you the repair cost and the replacement cost side by side, with no pressure.
Can you install a new furnace in Fort Worth the same day?
In many cases, yes. Outside of peak winter demand months, Meadowsweet often has furnace stock on hand and can schedule installation same-week or even same-day for straightforward replacements. During cold snaps or busy months, scheduling may be a few days out. The best way to check availability is to call (682) 610-2888 and speak with a live person, who can check the schedule and equipment availability immediately.
Ready to Get a Written Price on Furnace Replacement in Fort Worth?
The only way to know your true furnace replacement cost is to have a technician assess your specific home. That assessment is free with Meadowsweet Heating and Air. You’ll get a detailed, written price before any work starts, a clear explanation of what’s included, and a recommendation based on your home size, budget, and efficiency goals.
Whether you’re in Fairmount, Wedgwood, Arlington Heights, or anywhere else in Fort Worth, our team is ready to help. Call (682) 610-2888 any time, day or night, and speak directly with a live person. No voicemail queue, no call center maze. We’ll answer your questions, walk you through your options, and schedule a free estimate at your convenience.
Pricing reflects the Fort Worth market as of 2026. Meadowsweet Heating and Air Fort Worth offers free estimates – call (682) 610-2888.
Written by Luis Serrano, Owner at Meadowsweet Heating and Air Fort Worth, serving Fort Worth since 2004.
What Our Customers Say
"AC repair in July. The tech laid a mat down by the indoor unit and wore booties through the house. Fixed it fast and left zero mess. Quiet and kind, good with our nervous dog too."
- Delia Frost"Our heat went out and they came the same evening. The tech was gentle and patient explaining what went wrong, used clean drop cloths, and took his shoes off at the door. Warm again and no mess."
- Brenda Caldwell"Replaced a failing capacitor and cleaned the unit. What I noticed was how respectful he was of the house and how spotless he left the utility closet. Fair price too."
- Tomas Rivera