Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterFurnace Repair in Fort Worth, TX
Furnace repair in Fort Worth usually means one of three things: the unit won’t start, it starts but blows cold air, or it’s making a noise that wasn’t there last winter. Most repairs run between $180 and $650, depending on what’s failed and how old the system is. Meadowsweet Heating and Air Fort Worth handles all of it, from failed igniters on a Trane to a cracked heat exchanger on a Bryant, and we’ll give you a written price before any work starts. If you’re wondering whether it’s worth fixing or replacing, call us at (682) 610-2888 and we’ll walk through it honestly. This page covers what we fix, what it costs in the Fort Worth market, and how our Heating & Furnace service works from first call to final clean-up.
When You Need Furnace Repair
Fort Worth winters are short but they swing hard. A furnace that limped through a mild December will fail outright during a January cold snap, and that’s exactly when every family in Tarrant County is calling for help. Here are the symptoms that tell us a repair visit is worth scheduling, not postponing:
- The furnace starts, runs a few minutes, then shuts off. This is called short cycling. In Fort Worth homes we often trace it to a dirty flame sensor or a clogged filter, both of which are quick, affordable fixes when caught early.
- The blower runs but the air coming out of the vents is cool or room-temperature. That points to an igniter failure, a tripped limit switch, or a gas valve issue. We see igniter problems regularly on Daikin and York units in the area, especially when the furnace hasn’t been touched since the previous winter.
- You smell something that isn’t just “first startup of the season” dust. A brief dusty smell is normal. A persistent sulfur-like or gas odor is not. Call us immediately and we’ll help you determine whether to shut the system down while you wait.
- There’s a rattle, bang, or squeal that started recently. A delayed ignition can produce a small “bang” on startup, and a slipping blower belt will squeal. Both are repairable, and both get worse the longer they’re ignored.
- Rooms at the end of the house are consistently colder than the rest. Sometimes this is an airflow or duct issue rather than the furnace itself. We’ll diagnose it on the same visit and tell you exactly what’s causing the imbalance before recommending any repair.
- The furnace is 12 years old or older and needs a repair that will cost more than half its replacement value. We’ll run the numbers with you in plain English. Sometimes repair is the right call. Sometimes a new American Standard or Bryant installed on our schedule is the smarter money.
One thing we’re careful about: we won’t sell you a replacement when a $200 repair does the job. The Cedarwell Care Promise starts with a written price before any work begins, so you’ll always know the cost of repair versus replacement before you decide anything.
Our Furnace Repair Process
Here’s exactly what happens when you call Meadowsweet Heating and Air Fort Worth for furnace repair:
- You call, a live person answers. There’s no voicemail queue and no “press 2 for service.” You’ll speak to someone at (682) 610-2888 who can schedule your visit, day or night.
- We arrive on time, in uniform, with shoe covers on before stepping inside. Drop cloths go down under the work area. If you have kids or pets, we’ll ask where they are so we can work around nap schedules and keep tools out of reach.
- We diagnose the issue and explain it to you in plain language. We’ll show you the failed part when it’s accessible. You’ll know what broke, why it broke, and what the repair involves before you approve anything.
- You receive a written price before any work starts. Not an estimate range, not a verbal quote. A written number with parts and labor broken out. We never start work until you say go.
- We complete the repair, test the full cycle, and clean up thoroughly. The unit gets cycled multiple times to confirm the fix holds. Floors get swept or vacuumed around the work area.
- Before the crew leaves, we take a photo of the clean-up and send it to you. That’s part of every job, not an add-on charge. You’ll see exactly how the space was left, even if you weren’t standing there.
Furnace Repair Pricing in Fort Worth
Furnace repair costs in the Fort Worth area break down by the part that failed and the labor to reach it. Based on the work we do across neighborhoods like Fairmount, Ryan Place, Wedgwood, and the Near Southside, here’s what families typically pay:
What Affects the Price
- Which part failed. A flame sensor replacement runs $120 to $200. An igniter is $150 to $280. A gas valve runs $300 to $550. A blower motor sits between $400 and $800 depending on the unit.
- How accessible the furnace is. A unit in a garage with clear access is cheaper to work on than one squeezed into an attic or a tight closet. We’ll factor that into your written price before work starts.
- Brand and age. We service Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. Parts for older or discontinued models sometimes cost more, and we’ll tell you that before ordering anything.
- Time of year. Fort Worth’s peak heating demand hits in January and early February, but we don’t charge surge pricing. The price you get is the price the job costs, year-round.
We give free estimates on every repair visit. The diagnostic fee is waived when you approve the repair on the spot, and you’ll know the exact number before we touch a tool. Call (682) 610-2888 and we’ll give you an honest read on what your furnace needs and what it’ll cost.
What Furnace Brands We Repair
Some companies only want to touch the brand they sell. We service nine major equipment lines because Fort Worth homes came with all of them. Our technicians work on York and Daikin units regularly, and we keep common parts for American Standard, Bryant, Trane, Lennox, Carrier, Goodman, and Rheem either on the truck or available same-day through local supply houses. If your system is under manufacturer warranty, we’ll help you document the repair for your claim and tell you which parts the warranty covers before we order anything.
Furnace Repair Safety
Gas furnaces carry real hazards: carbon monoxide from a cracked heat exchanger, gas leaks at the valve or fittings, and electrical risks inside the cabinet. If you suspect a gas smell, open windows, and call us from outside or from another room. Don’t try to open the furnace cabinet or inspect the gas line yourself. A trained professional with the right detection tools can identify a heat exchanger crack or a failing gas valve in minutes, safely. We test for carbon monoxide as part of every repair diagnosis on a gas furnace, and we’ll tell you what we found and what it means for your household.
Why Fort Worth Families Call Meadowsweet for Furnace Repair
Most of our customers have kids, dogs, or both. That changes how a repair visit should go. Our crews follow the C.A.R.E. values on every job: Clean up like it’s their own home, Ask before moving anything, Respect the family’s time and quiet hours, Explain the price before the work. That’s not a poster in the office. It’s a checklist on every work order, and it’s why a furnace visit through Meadowsweet doesn’t leave a mess behind the unit.
We’re part of the Cedarwell family of HVAC companies, founded in 2004. The 365-Day Done Right Promise applies to furnace repair the same way it applies to a full system install: if it’s not done right, we make it right. No runarounds, no fine print. Every visit includes a written price before work begins, shoe covers and drop cloths on your floors, and a photo of the clean-up before the crew leaves. A live person answers the phone 24 hours a day, 7 days a week, including nights, weekends, and holidays.
If your furnace is acting up on a cold Fort Worth night, don’t wait for it to get worse. Call (682) 610-2888 and we’ll have a technician at your door with a straight answer and a clear price.
FAQs – Furnace Repair
How much does furnace repair cost in Fort Worth?
Most furnace repairs in Fort Worth fall between $180 and $650, depending on the failed part and your furnace’s age and location in the house. Simple fixes like flame sensor cleaning run under $200, while a gas valve or blower motor replacement ranges from $400 to $800. Call (682) 610-2888 for a free estimate with a written price before any work starts.
How fast can you come out for furnace repair in Fort Worth?
We answer calls live 24/7 and schedule same-day or next-day visits for most furnace repair calls in Fort Worth. Cold snaps and holiday weekends get busy, but a live person will always answer and tell you exactly when a technician can be at your door. Call (682) 610-2888 to check current availability.
Is it cheaper to repair a furnace or replace it?
Repair is cheaper in the short term, but the right answer depends on the repair cost and your furnace’s age. A $200 flame sensor fix on a 7-year-old unit is almost always worth doing. A $700 blower motor on an 18-year-old furnace may not be. We’ll show you both numbers and give you a straight recommendation, not a sales pitch. Call (682) 610-2888 and we’ll help you work through the math.
Can you service any furnace brand?
Yes. We repair and maintain furnaces from Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. Seven of those nine brands have common parts we keep stocked or can source same-day in Fort Worth. Call (682) 610-2888 and tell us your furnace’s brand and model; we’ll tell you if we have the parts before the visit.
What if my furnace has a gas smell?
If you smell gas, leave the house immediately and call us from outside or from a neighbor’s phone. We’ll advise you on whether to shut off the gas supply at the meter, and we’ll dispatch a technician right away. Don’t turn on lights, don’t use any appliances, and don’t try to locate the leak yourself. Call (682) 610-2888 and we’ll walk you through what to do right then.
Written by Luis Serrano, Owner at Meadowsweet Heating and Air Fort Worth, serving Fort Worth.