Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable AC Installation Across North Richland Hills
AC installation in North Richland Hills typically runs $3,500 to $7,500, and most full-system replacements take one day for the mechanical work with a short follow-up for final commissioning and testing. We work in North Richland Hills every week, and we know what these 1970s and 1980s homes throw at a new system: settled condenser pads, aging flex duct, and electrical panels that were never sized for modern heat pumps. If you’re replacing an old unit or adding cooling to a home that’s never had it, call (682) 610-2888 and we’ll give you a written price before any work starts.
North Richland Hills summers don’t ease up. When the temperature sits above 95°F for weeks at a stretch and the humidity makes the air feel thick, a properly sized, correctly installed AC system isn’t optional. It’s the difference between a house that cools evenly and a bedroom that never gets below 80. Our AC Installation team handles the whole job: load calculation, equipment selection, permits, install, and the clean-up afterward.
Why Meadowsweet Heating and Air Fort Worth Is North Richland Hills’s Preferred AC Installation Company
We’re part of the Cedarwell family of HVAC companies, founded in 2004, and every job we complete in North Richland Hills carries the Cedarwell Care Promise. That means three things on every visit: a written price before any work starts, shoe covers and drop cloths inside your home, and a photo of the clean-up sent to you before the crew drives away. The 365-Day Done Right Promise backs the whole job. If something isn’t right, we make it right. No runarounds, no fine print.
When we install a system in a North Richland Hills home, the crew follows the C.A.R.E. values code. They clean up like it’s their own house, ask before moving anything, respect your family’s quiet hours, and explain the price before turning a single screw. If your kids are napping or your dog is nervous around strangers, tell us. We’ll work around it. That’s not an upsell. It’s how we run every job.
Our technicians are background-checked and uniformed, and they service equipment from nine brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. When you call us about a system in North Richland Hills, a live person answers, 24 hours a day, seven days a week. No voicemail queue, no answering service that reads a script.
Styles & brands we work with







Furnace Installation in North Richland Hills
Furnace Installation in North Richland Hills usually means replacing a gas furnace in a slab-on-grade home where the original unit has been in service since the Reagan administration. These jobs typically run $3,500 to $7,500 when paired with a new AC system, which is how most North Richland Hills homeowners handle it. A furnace replacement on its own sits at the lower end of that range. The work involves removing the old unit, installing the new furnace, connecting gas and exhaust lines safely, and verifying the system runs clean and quiet before we leave.
Attic Furnace Considerations
Many east-side North Richland Hills homes from the 1980s have furnaces installed in the attic with flexible ductwork running through unconditioned space. After thirty or forty years of Texas heat, that flex duct collapses, tears, or separates at the joints. A new furnace connected to failing ductwork will not perform, no matter how efficient the unit is. We inspect the ducts during every install and tell you honestly what needs attention before you spend money on equipment.
When Replacement Makes Sense
If your furnace is pushing 20 years old, needs frequent repairs, or makes a sound like a jet engine when it fires up, replacement usually costs less than continuing to patch it. A cracked heat exchanger is a safety issue, not a repair opportunity. We’ll give you a straight answer and a written price, and we won’t push a replacement if a repair will honestly serve you better.
HVAC Installation in North Richland Hills
HVAC Installation in North Richland Hills covers the full heating and cooling package: outdoor condenser, indoor evaporator coil, furnace or air handler, thermostat, and the connections that make them work as one system. A complete HVAC install in this market runs $3,500 to $7,500 depending on efficiency level, home size, and whether the ductwork needs work. We do the load calculation first so the system is sized for your actual house, not for a rule of thumb.
Whole-System Matching
One thing we push back on, gently, is mismatched equipment. A new high-efficiency condenser paired with an old evaporator coil will underperform and fail early. When the job calls for it, we replace the matched set and explain why. It costs a little more up front and saves real money over the life of the system. North Richland Hills summers are too long to gamble on a half-matched install.
Ductwork Assessment
Before we install anything, we look at the ducts. In homes built between 1970 and 1995, undersized or leaky ducts are common. Sealing and repairing the ducts before installing a new system means the equipment actually delivers the comfort you paid for. We’ll show you photos of what we find, write up a price for the duct work, and let you decide before any work begins.
Trusted Brands We Service in North Richland Hills
We install and service equipment from York, Daikin, Bryant, and American Standard, along with five other major brands. When a North Richland Hills customer needs a specific part, we can source it quickly, and our techs carry the common capacitors, contactors, and control boards that fail most often in this climate. That means less waiting when your system goes down in July. You pick the brand, or we recommend one based on your home’s layout, your budget, and how long you plan to stay in the house. Either way, you get the same written price and the same 365-Day Done Right Promise.
Common AC Installation Problems We See in North Richland Hills Homes
- Settled condenser pads after heavy storms. North Richland Hills has a large stock of slab-on-grade homes from the 1970s through the 1990s, and the concrete pads under outdoor condensers tend to sink or tilt after years of rain and soil movement. A tilted condenser pulls on the refrigerant lines and stresses the compressor, which shortens the life of a brand-new system if it’s not corrected during install.
- Collapsed or undersized flex duct in 1980s attics. The east side of North Richland Hills is full of homes with attic-installed furnaces and flexible ductwork that has baked in extreme heat for decades. Collapsed ducts choke airflow, spike static pressure, and can kill a new blower motor within a year if the installer doesn’t catch it first.
- Flooded condensers switched back on too soon. After a storm or a microburst, we see condensers that sat in standing water and were powered back on without drying out. Water inside the unit shorts the compressor windings or blows the capacitor. This turns what should be a $150 repair into a full condenser replacement.
- Surge damage from storm outages. North Richland Hills gets its share of severe weather, and power surges during outages fry control boards on systems that don’t have surge protection. We install a whole-home surge protector for $150 to $400 on new AC installs, because it’s a lot cheaper than replacing a control board and waiting days for the part.
See the difference
Before
After
Before
After
Before
AfterPricing for AC Installation in North Richland Hills, TX
Here’s what families in North Richland Hills should expect to pay for the work we’re describing on this page.
| Service | Typical Price Range |
|---|---|
| AC Installation (full system) | $3,500 – $7,500 |
| Whole-home surge protector | $150 – $400 |
| Condenser pad replacement and leveling | $150 – $500 |
Your total depends on the size of your home, the efficiency rating you choose, and what condition the ductwork is in. The quoted range covers typical single-family homes in North Richland Hills. We give you a written price before any work begins, and that price doesn’t change unless the scope changes and you approve it first. Call (682) 610-2888 for a free estimate on your specific house.
Storm Season and Your AC: What North Richland Hills Homeowners Need to Know
North Richland Hills sits in a weather pattern that’s hard on cooling equipment. Long, humid summers push systems to run constantly. Severe storms bring hail, flooding, and power surges. And the city’s housing stock, dominated by slab-on-grade homes built from the 1970s through the 1990s, adds its own complications. After heavy rain, we regularly see condenser pads that have settled or tilted, pulling refrigerant lines and stressing compressors. This failure pattern is far more common in North Richland Hills than in neighboring cities with newer pier-and-beam construction, because slab pads sit directly on expansive clay soil that shifts with moisture.
If your condenser sat in floodwater, do not simply switch it back on once the water drains. Water inside the cabinet can short the compressor windings, blow the dual-run capacitor, or corrode the control board. The safe sequence is to pull the disconnect, dry the interior thoroughly, inspect the electrical components, and check the refrigerant charge before restarting. After a July microburst flooded a cul-de-sac off Smithfield Road, our crew found a Rheem condenser half-submerged and a blown dual-run capacitor. We pulled the disconnect, dried the control board, replaced the capacitor, and checked the refrigerant charge before restarting, which saved a compressor that a simple power-on would have destroyed.
Generators are another piece of the puzzle. A correctly sized generator can keep your AC running through an outage, but it needs to be paired with a proper transfer switch and a surge protector to avoid damaging the system when grid power returns. Whole-home surge protection costs $150 to $400 and takes about an hour to install. Given how often North Richland Hills loses power during storm season, we recommend it on every new install.
We Also Serve Cities Near North Richland Hills
Our North Richland Hills customers often refer us to friends and family in nearby communities. We also provide AC installation, furnace installation, and full HVAC service in Hurst, Haltom City, Bedford, and Fort Worth. If you’re anywhere in the HEB area or the surrounding Tarrant County neighborhoods, we can get a crew to you quickly.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in North Richland Hills
No. Turning on a flooded condenser before it’s been dried and inspected can short the compressor windings, blow the capacitor, or destroy the control board. Pull the disconnect and call us at (682) 610-2888. We’ll dry the unit, check the electrical components, verify the refrigerant charge, and restart it safely if it’s sound. This is a job where turning the power on too soon turns a $150 repair into a $7,500 replacement.
Yes, and we strongly recommend one. North Richland Hills sees frequent storm-related power surges that fry control boards on unprotected systems. A whole-home surge protector costs $150 to $400 and installs in about an hour. For a new system that costs several thousand dollars, it’s cheap insurance. We include the option in every quote.
It absolutely affects it. Collapsed or undersized flex duct chokes airflow and raises static pressure, which can destroy a new blower motor within a year. Before we install a new system, we inspect the ducts and tell you what condition they’re in. If they need replacement or sealing, we’ll give you a written price and let you decide. Installing a new system without addressing bad ducts is throwing money away.
There’s no one-size answer. The right tonnage depends on square footage, ceiling height, window orientation, insulation levels, and how the home sits relative to the sun. A load calculation, not a rule of thumb, determines it. Many 1970s slab homes in North Richland Hills were originally sized at 2.5 to 3 tons for 1,600 to 1,800 square feet, but that varies with your actual home. We run the calculation on every install, and the written price includes the correctly sized unit.
Yes, if the generator is correctly sized and the system has a proper transfer switch and surge protection. A portable generator plugged into a random outlet is not the way to do it. We can advise on what your system needs and connect you with a licensed electrician for the transfer switch work. For most North Richland Hills families, the priority is surge protection on the AC plus a generator sized for the refrigerator, a few lights, and a window unit for one bedroom. Call (682) 610-2888 and we’ll walk you through the options for your house.
When you’re ready to replace your AC or your whole HVAC system in North Richland Hills, call (682) 610-2888. We’ll schedule a time that works for your family, do the load calculation, give you a written price, and install the system the way we’d want it done in our own home. Shoe covers, drop cloths, a photo of the clean-up before we leave, and a 365-day promise that it’s done right. That’s the deal, every time.
Written by Luis Serrano, Owner at Meadowsweet Heating and Air Fort Worth, serving North Richland Hills and the surrounding Tarrant County communities.