Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable AC Installation Across Hurst
AC installation in Hurst typically runs $3,500 to $7,500 for a complete system replacement, and most jobs are finished in one to two days. Hurst homes, especially the 1960s and 70s ranch houses with slab-embedded ductwork, need an installer who checks what’s actually under the concrete before sizing any new equipment. We work across Hurst every week, from the older streets east of Precinct Line Road to the newer builds near Hurst Town Center. If you’re planning an AC installation in Hurst and want a written price before any work begins, call Luis Serrano and the Meadowsweet team at (682) 610-2888.
Key Takeaways for Hurst Homeowners
- Full AC installation in Hurst runs $3,500 – $7,500 depending on home size, duct condition, and equipment tier.
- Hurst’s clay soil moves with every wet-dry season, which means slab ducts get crushed or cracked. A duct leakage test belongs in every install quote here.
- Flooded condensers after spring storms should never be switched back on without inspection. Waterlogged compressor windings short out fast.
- Meadowsweet sends background-checked, uniformed technicians who put down shoe covers and drop cloths before touching your floors. Every visit ends with a photo of the clean-up.
Styles & brands we work with
Why Meadowsweet Heating and Air Fort Worth Is Hurst’s Preferred AC Installation Company
Hurst homeowners call us because we take the time to map the home before we ever quote a price. That means checking the attic air handler, testing for duct leakage under a slab foundation, and looking at how the existing condenser held up through Hurst’s hail seasons. Luis Serrano runs our crews on the Cedarwell Care Promise, which means three things on every single job: a written price before work starts, shoe covers and drop cloths inside your home, and a photo of the clean-up before we leave. That’s not an upgrade. It’s the standard.
We’re part of the Cedarwell family of HVAC companies, founded in 2004, and we service nine major equipment brands. Our Hurst customers frequently tell us the same thing: the crew arrived on time, explained the price before touching a tool, and left the hallway cleaner than they found it. Pets and kids don’t get bothered because we use quiet tools during nap hours when the job allows. AC Installation in a home with a sleeping baby or a nervous dog is a different job than an empty rental. We plan for that.
When you call Meadowsweet, a live person answers. Not a voicemail tree, not a callback promise. If you’re in Hurst and your system is down on a Saturday night in July, you’ll speak to a human who can schedule the visit and give you a straight answer about response time.
Furnace Installation in Hurst
Furnace Installation in Hurst is a job we handle year-round, but the best planning window is late summer or early fall before the first freeze warning. A new furnace paired with a new AC system lets us run one set of duct tests and one sizing calculation, instead of guessing twice. For a Hurst home, furnace replacement typically lands in the same $3,500 – $7,500 range when bundled with AC installation, while a standalone furnace swap often runs lower depending on the size and venting requirements.
Post-Freeze Furnace Checks
After a Hurst winter freeze-thaw cycle, we check for corroded gas valves and cracked heat exchangers in original 40-year-old furnaces. Homes east of Precinct Line Road have a lot of original equipment still running from the 1980s. If your furnace sits in an unconditioned attic, condensate lines can freeze and split, and corrosion from that moisture shows up weeks later. A furnace installation in Hurst should include a combustion safety check and a flue inspection, not just a box swap.
Ductwork and Sizing Before the Quote
A furnace in a Hurst ranch home with slab ducts needs a static pressure check before the install date. Crushed ducts under a concrete floor increase pressure and shorten blower motor life. We include a duct leakage test in our system replacement visits because in Hurst, it’s not optional.
HVAC Installation in Hurst
HVAC Installation in Hurst means the complete package: condenser, furnace or air handler, evaporator coil, thermostat, and ductwork assessment. Most Hurst homes we serve need this full-scope work once the original equipment passes 15 to 20 years. The installed cost for a full system typically runs $3,500 – $7,500, depending on the home’s square footage and whether we’re repairing or replacing sections of ductwork.
Clay Soil and Slab Duct Reality
The clay soil under Hurst expands in spring rains and contracts in dry summer heat. Over decades, that movement crushes or cracks the ducts embedded in slab foundations. Every HVAC installation in Hurst should begin with a duct leakage test, because a new high-efficiency system connected to leaking underground ducts performs like a cheap one. We often replace damaged slab runs with new flex duct routed through the attic, which also allows us to seal and insulate properly.
A Real Hurst Install, Step by Step
Our crew just finished a full system swap on a 1973 ranch off Precinct Line Road. The homeowner’s 4-ton Goodman condenser had flooded after a spring storm and kept tripping the breaker. We found slab ducts crushed in two places from years of clay movement, replaced them with new flex runs, installed a 4-ton Trane XR16 with a whole-home surge protector, and verified the SEER2 rating under real static pressure before leaving. That’s the difference between an install and an install done right.
Trusted Brands We Service in Hurst
We install and service equipment from Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. For Hurst homeowners, we keep commonly needed parts in local stock: contactors, capacitors, thermostats, and condensate components. That means fewer multi-day waits when a spring storm takes out a capacitor or a flooded condenser needs an electrical check. If you want a specific brand’s factory rebate, we help complete the paperwork and include it in your written estimate. No brand loyalty required from you. We recommend what fits the home and the ductwork, not what’s left in a warehouse.
See the difference
Before
After
Before
After
Before
AfterCommon AC Installation Problems We See in Hurst Homes
- Flooded condensers switched on without inspection. After Hurst’s spring storms, waterlogged compressor windings short out within minutes. Even if the breaker doesn’t trip immediately, the damage voids the manufacturer’s warranty.
- Surge-damaged capacitors missed during install. Lightning strikes near Hurst homes weaken the capacitor. It tests fine on installation day, then fails three weeks later and the compressor won’t start.
- Crushed slab ducts ignored. A new system connected to cracked under-slab ductwork pushes static pressure sky-high. The blower motor burns out prematurely, and the homeowner gets blamed for “runtime” when the real issue was duct loss.
- Attic drain pans leaking after new equipment goes in. Many 1970s Hurst ranches have air handlers in unconditioned attics. If the primary drain clogs or the pan cracks, water pools and stains the ceiling below. We inspect the pan and float switch as part of every install.
Pricing for AC Installation in Hurst, TX
A complete AC installation in Hurst runs $3,500 to $7,500. Here’s what shapes that range:
| Service | Hurst Price Range |
|---|---|
| AC Installation (full system) | $3,500 – $7,500 |
| AC Repair | $150 – $650 |
| Furnace Repair | $150 – $700 |
| Tune-Up | $80 – $200 |
On the lower end, you’re looking at a straightforward swap on a smaller single-story home with accessible attic ductwork. The higher end reflects two-story brick veneer homes with slab duct repair, zone control, or upgraded SEER2 equipment. The only way to know your exact number is to have someone test the ducts first. Estimates from Meadowsweet are free, and the price we write down is the price you pay. Call (682) 610-2888 to schedule a Hurst estimate.
We Also Serve Cities Near Hurst
Meadowsweet Heating and Air covers Hurst and the surrounding Tarrant County communities. We regularly send crews to North Richland Hills, Bedford, Haltom City, and Fort Worth. If you’re in Hurst and curious whether your specific street is in our service area, call us and ask. AC Installation in Hurst keeps our calendar full, so early planning ahead of June’s heat is always smart.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in Hurst
No. A flooded condenser in Hurst should be inspected before restoring power. Waterlogged compressor windings short out almost immediately when voltage returns, and the manufacturer’s warranty won’t cover flood damage. Call us at (682) 610-2888 and we’ll check the electrical, dry the unit, and test the compressor before it’s ever switched back on.
We strongly recommend one for every Hurst installation. Spring storms bring lightning, and a direct or nearby strike sends voltage spikes through the condenser’s capacitor and control board. The surge protector costs a fraction of a new compressor and can be installed at the panel or disconnect. Every install we quote includes it as a line item, and we’ll show you the price before you agree.
By running a duct leakage test first and a load calculation second. If the slab ducts are crushed or cracked, adding a bigger unit doesn’t fix the problem. We measure static pressure, find the leaks, and either repair or reroute the ductwork before selecting the equipment size. That’s the only way a new system in Hurst hits its rated efficiency.
SEER2 is the new 2023 efficiency standard that measures performance under more realistic external static pressure. Many older Hurst systems advertised a SEER number that was never achievable because the ductwork restricted airflow. On new installs we verify the SEER2 rating under actual static pressure, so you know what you paid for. It’s standard practice on every Meadowsweet install.
Yes, but it needs to be sized correctly and often requires a soft start kit. A standard portable generator won’t start a 4-ton condenser without one. If you’re planning a generator, tell us during the AC installation planning call and we’ll factor the starting load into the equipment recommendation. Whole-home standby generators in Hurst are the most reliable option for running central air through an outage.
Call Meadowsweet for Your AC Installation in Hurst
If you’re in Hurst and need a new AC system installed right, call (682) 610-2888 for a free written estimate. Luis Serrano and the Meadowsweet team will check your ductwork, test for what Hurst’s clay soil and storm season have done to your current setup, and hand you a price before any work begins. Every job is backed by the 365-Day Done Right Promise. If it’s not done right, we make it right. No runarounds, no fine print.
Written by Luis Serrano, Owner at Meadowsweet Heating and Air Fort Worth, serving Hurst and Tarrant County through the Cedarwell family of HVAC companies.