Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterFurnace Replacement in Fort Worth, TX
Furnace replacement in Fort Worth typically costs between $4,200 and $8,500 for a mid-efficiency gas furnace, and $6,800 to $12,400 for a high-efficiency model with a variable-speed blower. Most homes in Fort Worth need a furnace sized between 60,000 and 100,000 BTUs depending on square footage, insulation, and window count. If your current furnace is over 15 years old, needs a repair that costs more than a third of what a new one would, or is showing rust around the burners, replacing it usually makes more financial sense than patching it again. At Meadowsweet Heating and Air Fort Worth, we handle the full replacement: removing the old unit, sizing the new one correctly, installing it, and leaving your floors exactly as we found them. Call (682) 610-2888 for a free replacement estimate, or read more about our Heating & Furnace services.
We know a furnace replacement is a big purchase. That’s why every job starts with a written price before we touch a single tool. No surprise line items. No “wait, what’s this charge?” moment after the work is done. Luis Serrano leads our Fort Worth team, and the standard he sets is simple: when our crew leaves, the only evidence they were there is a warm house in winter and a furnace that runs quietly for years. If you want the straight answer on whether you need a replacement or a repair, call us. We’ll tell you the truth, even if the truth is “you don’t need us right now.”
We’re part of the Cedarwell family of HVAC companies, founded in 2004 and built around a care promise that’s stayed the same ever since: treat every home like it’s our own. For furnace replacement, that means protecting your floors, your air, and your family’s routine from the moment we pull up.
Key Takeaways
- Fort Worth furnace replacement runs roughly $4,200 to $12,400 depending on efficiency and size
- Every replacement includes a written price before work starts, plus shoe covers, drop cloths, and a clean-up photo
- We service and install equipment from nine major brands, including York, Daikin, Bryant, and American Standard
- A live person answers our phone 24/7, including nights and weekends
- Every job is backed by the 365-Day Done Right Promise
When You Need Furnace Replacement
Not every furnace problem means you need a new system. Plenty of issues only require a repair. But there are clear signs that replacement is the smarter path, and knowing them before you call can save you time and money. Here’s what we tell Fort Worth homeowners to watch for:
- Your furnace is 15 to 20 years old. Most furnaces in the Fort Worth area last between 15 and 20 years. If yours is in that range and starting to need frequent repairs, a replacement usually pays for itself in lower energy bills before the next decade is over.
- Repair costs are stacking up. A good rule of thumb: if a single repair costs more than 30% of a new system, or if you’ve called for service twice in one winter, stop paying for band-aids. In neighborhoods like Wedgwood and Ridglea Hills we see this pattern often, older homes with original furnaces limping through January cold snaps.
- Rooms heat unevenly. Cold spots in the back bedroom or a hallway that never quite warms up can signal a furnace that’s lost capacity or a duct system that doesn’t match the equipment anymore. Sometimes the fix is a new unit sized for the actual house, not the one built 40 years ago.
- Rust, soot, or a yellow flame. Rust around the burner area or pilot light, soot streaks near supply vents, or a flame that burns yellow instead of clean blue are all signs of incomplete combustion. That’s not just an efficiency problem. It needs a professional’s eyes quickly, and often the recommendation is replacement.
- Indoor air feels dry or dusty all winter. Older furnaces pull air differently. A sealed, high-efficiency unit paired with proper filtration can reduce the dust and dryness Fort Worth families notice during the colder months, especially in homes with pets.
- Your energy bills keep climbing. Even accounting for rate changes, a 15 or 20 year old furnace working at 60-70% efficiency costs more to run than a new 90%+ unit. If your Janauary gas bill made you wince, that’s a data point worth paying attention to.
If any of these sound familiar, call (682) 610-2888. We’ll do an honest assessment and tell you whether a repair makes sense or a replacement is the better investment. Estimates are free either way.
Our Furnace Replacement Process
We’ve replaced furnaces in homes all over Fort Worth, from Ryan Place bungalows to new construction in Alliance. The process is the same everywhere, because a system keeps people from skipping steps. That system is the Cedarwell Care Promise, and it shows up at every stage.
- We start with a load calculation, not a guess. Before we recommend anything, we measure your home’s square footage, ceiling height, window orientation, insulation levels, and duct condition. A furnace that’s too big short-cycles and wears out early. One that’s too small can’t keep up on the 20-degree nights Fort Worth gets a few times each winter. Proper sizing matters.
- We give you a written price before any work starts. You’ll see the full cost: equipment, labor, permits, disposal of the old unit, and everything else. No verbal ballpark, no “we’ll see once we’re in there.” The price we write down is the price you pay. This is non-negotiable for us.
- We protect your floors and the path to the furnace. The crew puts on shoe covers at the door. Drop cloths go down from the entry to the furnace and around the work area. If your furnace is in the attic, we protect the ladder path and any rooms we walk through. If pets are home, we ask before entering rooms where they’re resting and we keep exterior doors closed.
- We remove the old furnace and install the new one carefully. We handle the full mechanical work: gas connections, venting, electrical, condensate lines if you’re going high-efficiency, and thermostat wiring. The C.A.R.E. values govern how the crew works: clean up like it’s their own home, ask before moving anything, respect quiet hours if kids are napping, and explain the price before the work. Every time.
- We test and walk you through the new system. Before we leave, we run the furnace through a full heating cycle, check the gas pressure, test the safety switches, and confirm the thermostat is set correctly. Then we’ll walk through the new unit with you and answer any questions.
- We photograph the clean-up and send it to you. Before the crew packs up, they take a photo of the work area after clean-up and send it to you. It’s part of the job, not an add-on. You’ll see exactly how the space looked when we finished.
Furnace Replacement Pricing in Fort Worth
So what does a furnace replacement actually cost in Fort Worth? Here’s a realistic breakdown, based on the work we’ve done across the city. These are before any utility rebates or manufacturer promotions.
| Furnace Type | Typical Efficiency (AFUE) | Typical Cost Installed |
|---|---|---|
| Mid-efficiency gas furnace | 80-92% AFUE | $4,200 – $6,800 |
| High-efficiency gas furnace | 93-96% AFUE | $6,800 – $9,800 |
| High-efficiency with variable-speed blower | 96%+ AFUE | $8,500 – $12,400 |
| Modulating high-efficiency system | 97%+ AFUE | $10,500 – $14,500 |
Several things change those numbers. The size of the furnace, whether your ductwork needs modifications, access difficulty (attic installs in older Fort Worth ranch houses can be trickier than a closet system), and whether you’re switching from electric to gas all play a role. If you’re replacing an 80% efficiency furnace with a 96% model, there may be venting changes since high-efficiency units use PVC vents instead of a metal flue.
We also install equipment from York, Daikin, Bryant, and American Standard, among others. Different brands offer different warranty lengths and price points, and we’ll help you weigh what matters for your house and budget. But the installation quality is the same regardless of brand, because it’s the same crew, same process, same care promise.
The best way to get an accurate number is to call us. We’ll come out, do the load calculation, and give you a written estimate for free. No obligation. Call (682) 610-2888 and ask for Luis. He’ll walk you through what makes sense for your home.
FAQs — Furnace Replacement
How much does furnace replacement cost in Fort Worth?
Most Fort Worth furnace replacements run between $4,200 and $12,400 installed, with the sweet spot for most homes landing around $6,000 to $9,000 for a high-efficiency 96% AFUE unit. The price depends on furnace size, efficiency rating, brand, and ductwork condition. We provide a written quote before any work starts, so you’ll know the exact total before deciding. Call (682) 610-2888 for a free in-home estimate.
Is it cheaper to repair or replace my furnace?
It’s usually cheaper to repair a furnace if it’s under 12 years old and the repair is minor, like a flame sensor or ignitor or blower capacitor. But if your furnace is 15+ years old and needs a repair over $1,500, replacement often wins on total cost of ownership. We’ll give you the repair quote and the replacement quote side by side, then you decide. No pressure either way.
Can you replace my furnace the same day?
In many cases, yes. If we have the right size unit available and the existing ductwork is in good shape, we can replace a furnace in a single day. More complex jobs, like switching from electric to gas or reconfiguring venting, may take a day and a half. Call (682) 610-2888 and we’ll tell you what to expect for your specific home before scheduling.
What brands do you install?
We install and service equipment from nine major brands, including York, Daikin, Bryant, and American Standard. The right brand for you depends on your budget, efficiency goals, and warranty preferences. Installation quality matters more than the logo on the cabinet, and our process is identical regardless of brand: written pricing, protected floors, and a clean-up photo before we leave.
Will your crew keep my house clean during the install?
Yes. Shoe covers and drop cloths are standard on every visit, and we photograph the clean-up before leaving. The C.A.R.E. values code governs how our crew works: we clean up like it’s our own home, ask before moving anything, and respect quiet hours if kids are sleeping or studying. Pets are kept safe with closed doors and careful entry and exit.
Written by Luis Serrano, Owner at Meadowsweet Heating and Air Fort Worth, serving Fort Worth.