Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Hurst
When a furnace stops firing on a cold Hurst night, you need a repair crew that knows the difference between a routine ignitor failure and a cracked heat exchanger in a 1972 slab-on-grade ranch. Furnace repair in Hurst typically runs $150 – $700, and most jobs are resolved in a single visit. Our service area covers every neighborhood from Precinct Line Road to the HEB school district’s western edge, and a live person answers our phone 24 hours a day. Call (682) 610-2888 and you’ll speak to someone who can schedule a Hurst technician immediately.
Why Meadowsweet Heating and Air Fort Worth Is Hurst’s Preferred Furnace Repair Company
Our Furnace Repair team has worked on more slab-embedded flues and attic-hung air handlers in Hurst than most companies see across the whole metroplex. The older ranch neighborhoods east of Precinct Line Road and the brick veneer two-stories built in the 1980s present a very specific set of freeze-thaw failures, and our techs recognize them quickly. That means fewer return visits, a written price before any work starts, and no surprise charges when the job is done.
Every Hurst visit includes the Cedarwell Care Promise: shoe covers and drop cloths inside your home, a photo of the clean-up sent before the crew leaves, and a 365-Day Done Right Promise that stands behind the repair. If the fix isn’t right, we make it right. Luis Serrano, who leads our operation, insists on that standard because families with kids and pets shouldn’t have to wonder what got dragged across the carpet during a furnace emergency.
A live person answers when you call, not a voicemail queue. Nights, weekends, holidays. That matters when a cold front blows through Hurst and the furnace won’t light at 11 p.m.
Styles & brands we work with
Furnace Tune Up in Hurst
Furnace Tune Up in Hurst is the single best way to catch a failing heat exchanger before winter, and it’s a fast, flat-rate visit that costs $80 – $200. The job includes checking gas pressure at the manifold, testing the ignitor’s draw, cleaning the flame sensor, inspecting the heat exchanger for cracks, verifying the limit switch opens and closes correctly, and measuring the temperature rise across the system. Homeowners with original equipment from the 1970s and 1980s should schedule this annually, especially here where slab movement stresses everything connected to the furnace.
What the Tech Actually Checks
On a Hurst tune-up, we look for the failures this city actually produces: cracked slab-embedded flues, corroded gas valves from condensation after freeze-thaw cycles, and blower motors clogged with dust from unconditioned attics. We also test static pressure on systems with older ductwork, because undersized return air is the hidden cause of many overheating furnaces in ranch homes.
Written Report After Every Tune-Up
You’ll receive a written report of what was checked, what was found, and whether anything needs attention now or can wait. Our technicians are not paid on what they sell, so the report is honest. If you want a tune-up before the season turns cold, call (682) 610-2888 and we’ll get you on the schedule.
Emergency Furnace Repair in Hurst
Emergency Furnace Repair in Hurst means no heat on a freezing night, a furnace short-cycling every few minutes, or a burning smell coming from the vents. These jobs typically run $150 – $700 depending on the part and the failure. We dispatch to all Hurst neighborhoods, including the older streets around Circle Drive and the subdivisions near Hurst Boulevard and Pipeline Road, on the same call. No overtime charge for nights or weekends.
What Counts as an Emergency
A gas smell, a furnace that won’t fire at all when the temperature is below 40°F, a blower motor that screams or won’t spin, or a carbon monoxide alarm that won’t stop. Carbon monoxide is invisible and odorless, so if the alarm goes off, leave the house and call us from outside. We’ll bring a combustion analyzer to confirm whether the heat exchanger is compromised before we do anything else.
Same-Visit Triage in Hurst
We carry ignitors, flame sensors, gas valves, pressure switches, and blower motor capacitors on the truck, so many Hurst repairs are finished on the first trip. For a full furnace replacement, we quote a written fixed price that same day and schedule the install on a set date, usually within the week. Your family doesn’t wait in the cold while we order parts from a warehouse on the other side of DFW.
Trusted Brands We Service in Hurst
We service Goodman, Rheem, and York furnaces in Hurst homes, along with Daikin and five other major brands. Many of the original furnaces we see in this city are Goodman units installed when homes were built in the 1970s through the 1990s. We stock common Goodman and Rheem parts locally, which means faster turnaround when your furnace fails in January. For propane systems common on Hurst’s eastern edge, we also check regulator output and burner orifice sizing, not just the ignition sequence.
Common Furnace Repair Problems We See in Hurst Homes
- Cracked heat exchangers in slab-on-grade ranch homes. The original furnaces in 1960s and 1970s Hurst houses often vent through slab-embedded flues. As the clay soil expands and contracts through wet and dry seasons, those flues crack and stress the heat exchanger above them. A combustion analyzer test reveals the crack before it turns into a carbon monoxide problem.
- Frozen condensate lines and seized gas valves after a hard freeze. Standard-efficiency furnaces in unconditioned attics sweat and drip. When a freeze hits Hurst, condensation inside the gas valve freezes, the diaphragm seizes, and the furnace won’t fire. We replace the valve and verify the flue is drafting correctly.
- Short-cycling propane furnaces on rural Hurst properties. When a propane tank’s pressure drops in cold weather, the furnace fires and shuts down repeatedly. Homeowners sometimes blame the blower motor or the thermostat, but our techs check regulator output and orifice sizing first, before condemning a perfectly good component.
- Wind-driven downdrafts and flame rollout on exposed farmhouse-style homes. Properties without wind shelter along Hurst’s rural eastern stretches suffer downdrafts that push flames outward and crack heat exchangers over time. This shows up most on 80% efficiency furnaces vented through the roof.
See the difference
Before
After
Before
After
Before
AfterPricing for Furnace Repair in Hurst, TX
Furnace repair in Hurst runs $150 – $700 for most jobs. A simple ignitor replacement on a Goodman or Rheem furnace is on the lower end. A gas valve replacement or blower motor on a two-stage Daikin runs higher. What affects the price: the part itself, how long it takes to access the unit in a tight attic or a slab-embedded closet, and whether the furnace needs a full post-repair safety check. A written price comes before any work starts, every time.
| Service | Typical Range in Hurst |
|---|---|
| Furnace Tune Up | $80 – $200 |
| Emergency Furnace Repair | $150 – $700 |
The estimate is free. Call (682) 610-2888 and we’ll give you a written price before a single tool comes off the truck.
We Also Serve Cities Near Hurst
Our crew covers North Richland Hills, Bedford, Haltom City, and Fort Worth, though this page focuses on Furnace Repair in Hurst and the neighborhoods that make this city distinct. If you live on the Hurst-Bedford line or in a rural stretch east toward Haltom City, call us and we’ll confirm your address is in our local dispatch area.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Hurst
The freeze-thaw cycle in Hurst’s clay soil shifts slab foundations, which stresses the original flues embedded in the concrete and can crack the heat exchanger above them. After any hard freeze, we recommend a combustion analysis on furnaces in 1960s and 1970s ranch homes. If a crack is present, the fix is a furnace replacement, not a patch. Call (682) 610-2888 and we’ll bring the analyzer out to your Hurst home.
We calculate heat loss based on the home’s actual exposure, not just square footage. A farmhouse-style home on an open lot loses heat faster than the same footprint in a sheltered subdivision, so the furnace needs more capacity or a two-stage burner that runs longer at lower output. We also look at duct sizing before recommending anything, because an oversized furnace on undersized ducts is a recipe for tripped limit switches and cracked heat exchangers.
The combustion side is the difference. Propane burns hotter and at different pressures than natural gas, so the gas valve, regulator, and burner orifices must be set correctly or the furnace runs dirty and overheats. We check regulator output at the tank and manifold pressure at the valve before adjusting or replacing anything. Calling (682) 610-2888 gets you a tech who reads the pressures, not someone who swaps parts hoping the problem goes away.
Yes, and we protect the ceiling the whole time. Our techs lay down drop cloths below the attic access, wear shoe covers, and ask before moving anything. In Hurst’s older ranch homes, attic furnaces often sit directly above living space, so a leaking drain pan or a careless tool drop can stain the ceiling. We work deliberately and send you a photo of the clean-up before the crew leaves.
The most common cause in Hurst’s detached workshops and garages is undersized or blocked ductwork driving static pressure too high, which overheats the heat exchanger and trips the limit switch. Converted mobile-home furnaces are frequent culprits. We measure static pressure, inspect the return air path, and correct the airflow before adjusting or replacing the limit switch. Call (682) 610-2888 for a diagnosis that starts with measurements, not guesses.
A Note on Slab-Embedded Flues and What They Mean for Your Furnace
Hurst has something most neighboring cities don’t: a high concentration of slab-on-grade ranch homes built in the 1960s and 1970s. Many of those original furnaces vent through flue pipes embedded in the concrete slab. As the clay soil under Hurst expands during wet seasons and contracts during summer droughts, the slab shifts. A shifting slab cracks the flue. A cracked flue lets combustion gases escape where they shouldn’t and stresses the heat exchanger. This failure mode appears in Hurst far more often than in Bedford or North Richland Hills, where housing stock skews newer or sits on pier-and-beam. It’s one of the reasons our techs slow down and check the full vent path during a tune-up, not just the burner.
Last winter, our crew was dispatched to a 1972 ranch on Circle Drive near Precinct Line Road. A Goodman furnace, original to the house, had stopped firing after a hard freeze. Our tech found a cracked heat exchanger, visible with a combustion analyzer, and a corroded gas valve that had seized from condensation. We replaced the valve, verified no carbon monoxide leakage, and the homeowner opted for a full furnace replacement rather than risk another freeze-thaw cycle. That’s a Hurst story, and it’s the kind of repair our Furnace Repair team handles regularly.
Call Meadowsweet Heating and Air Fort Worth for Furnace Repair in Hurst
When your furnace quits, you want a calm voice on the phone and a tech who already knows Hurst’s housing stock. That’s what we offer. Call (682) 610-2888 for a free estimate, a written price before any work begins, and a repair backed by the 365-Day Done Right Promise. We’ll protect your floors, ask before moving anything, and leave your home as clean as we found it. Serving Hurst, North Richland Hills, Bedford, Haltom City, and Fort Worth. We also offer Hurst AC Repair for cooling emergencies.
Written by Luis Serrano, Owner at Meadowsweet Heating and Air Fort Worth, serving Hurst since the company’s founding in 2004.