Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Everman
Furnace repair in Everman typically runs $150 – $700, and most fixes are completed in a single visit. If your furnace quit after a spring flood or a summer power surge, call (682) 610-2888 and a live person answers, day or night. Our Furnace Repair team knows Everman’s 1960s – 80s brick ranches, their quirky ductwork, and the way floodwater finds condensers on Enon Drive and Sharon Drive every storm season.
You don’t need to troubleshoot alone. We’ll name the likely failure, give a written price before any work starts, and protect your floors with shoe covers and drop cloths on every visit.
Why Meadowsweet Heating and Air Fort Worth Is Everman’s Preferred Furnace Repair Company
Everman homeowners call us because we’ve already fixed the furnaces across the street, around the corner, and two blocks over. The 1960s subdivisions off Enon Drive and Longhorn Trail have their own set of failure patterns. Our technicians don’t learn those patterns on your dime. They already know that a hallway-mounted return grille will change static pressure readings, and that a flooded condenser on Sharon Drive should never be switched back on until the capacitor and contactor have been inspected.
We’re part of the Cedarwell family of HVAC companies, founded in 2004, and every visit is built around the Cedarwell Care Promise: a written price before any work starts, background-checked uniformed technicians, and a 365-Day Done Right Promise. Our crews follow the C.A.R.E. code. They clean up like it’s their own home, ask before moving anything, respect your family’s time and quiet hours, and explain the price before the work. We also photograph the clean-up before we leave, so you’ll see exactly how the furnace closet looked when we finished. Luis Serrano leads our team, and he holds every job in Everman to that standard.
When a furnace dies in January and you can hear the wind outside your Everman home, fast response matters. Our dispatch is coordinated from the brand’s Dallas-Fort Worth office, and scheduling is set up to route a technician to Everman the same day in most cases. The phone is answered by a live person 24 hours a day, 7 days a week. No voicemail queue. No call backs at midnight.
Styles & brands we work with
Heating Repair in Everman
Heating repair in Everman usually means one of three things: a burner that won’t ignite, a blower motor that either won’t spin or won’t stop spinning, or a control board that stopped sending signals after a surge. The city’s original 1970s electric furnaces were built for a different Texas, and many of them still run with original wiring and undersized components. A repair visit here starts with reading the system’s actual behavior: thermocouple or flame sensor response, blower amp draw, capacitor health, and static pressure across the ductwork. Because so many Everman homes hide return-air grilles in hallways and closets, what often looks like a simple burner failure is actually a furnace overheating because it can’t pull enough air. The fix includes the burner but also the airflow correction, so you don’t get the same call again in three weeks. Heating repair in Everman falls in the $150 – $700 range on this page, with the lower end covering ignitor and sensor replacements and the upper end covering blower motors, gas valves, and control board work.
Ignitor and Flame Sensor Replacement
Electric ignition systems fail by cracking or by fouling. We test the ignitor’s resistance and voltage draw before replacing anything, so a failed ignitor doesn’t lead to a needless control board swap. The replacement is quick, and the written price is set before the part goes in.
Flame sensors collect carbon from Everman’s dust-heavy spring storm season and from long summer shutdowns. We clean or replace the sensor, verify flame rectification signal, and keep your furnace from locking out on those first cold nights in November.
Blower Motor and Capacitor Work
Blower motors on 1970s and 1980s furnaces in Everman often die the same way: the run capacitor fails, then the motor overheats trying to start against a dead component. We always test the capacitor first; it’s a $150-range fix that beats a full blower motor replacement. If the motor itself has burned windings or seized bearings, we’ll show you the amp readings, give you the price for the replacement motor, and replace it the same visit. Quiet tools matter here. If your kids are doing schoolwork or a baby is napping, we’ll work around the noise.
Boiler Repair in Everman
Boiler repair in Everman is less common, but a handful of 1960s-era homes still run hydronic heat, and those systems have their own failure modes. Circulator pumps seize after sitting idle through a long Texas summer. Expansion tanks lose their air charge and cause the relief valve to drip. Low-water cutoffs get dirty and shut the burner down. We service these systems with the same upfront pricing and same Done Right Promise. The differences in boiler work are the water side: sediment, air bleeds, and zone valve operation. Our techs will flush and inspect the expansion tank, test the aquastat, bleed air from the zones, and verify the gas valve and burners are clean before we give you a written price. Boiler repair in Everman falls in the $150 – $700 range, matching what furnace work runs in this market. A seized circulator pump or failed expansion tank tends to land in the middle of that range.
Circulator Pump and Zone Valve Inspection
A pump that hums but doesn’t spin usually has a seized bearing assembly or a bad capacitor. We confirm amp draw and rotation before replacing anything. Zone valves that won’t open leave one side of the house cold while the other side overheats. We test each valve’s power head and end switch individually.
Expansion Tank and Relief Valve Service
When the expansion tank is waterlogged, system pressure climbs until the relief valve drips. We check the tank’s air charge with a pressure gauge, re-pressurize or replace it, and watch the system run through a full heat cycle before we leave. Drips get fixed, not just wiped up.
What Happens to Everman Furnaces After Floods and Power Surges
Everman’s spring storm season brings two things that kill furnaces in very specific ways: floodwater and power surges. A flooded condenser on Sharon Drive is the emergency call we get most after a heavy rain. The water drowns the capacitor and the contactor. Homeowners then flip the breaker too soon, the compressor tries to start against a dead capacitor, and the compressor windings fry. That’s the difference between a $250 capacitor replacement and a full compressor job that no one wants in August.
Our tech pulled a 3-ton Carrier condenser from a 1972 brick ranch on Enon Drive after flooding killed the capacitor and left the unit short-cycling. We tested the capacitor, inspected the condenser coil for mud, and safely restarted the heat pump only after confirming the refrigerant charge and blower motor were dry. That sequence is standard for us. We don’t restart a flooded unit on a guess.
Trusted Brands We Service in Everman
We service Goodman, Rheem, York, and Daikin furnaces on a regular basis across Everman, along with the other five brands in our full lineup. Because these brands are common in the city’s original 1960s – 80s housing stock, our trucks typically carry the ignitors, flame sensors, capacitors, contactors, and gas valves needed for same-day repair. That local parts familiarity matters when your furnace dies on a cold night. We’re qualified on all nine brands, but in Everman we see Goodman and Rheem more than most, simply because that’s what builders put in back then.
See the difference
Before
After
Before
After
Before
AfterCommon Furnace Repair Problems We See in Everman Homes
- Overheating from undersized and oddly-placed ductwork. Homes built in Everman during the 1960s through 1980s often have return-air grilles in hallways or closets. The furnace can’t move enough air, the heat exchanger overheats, and the limit switch trips. We correct the airflow problem, not just the limit switch.
- Flood-damaged condensers and short-cycled compressors. Spring storms flood condenser pads, especially in low-lying yards near Enon Drive and Sharon Drive. Water destroys the capacitor and contactor, and a homeowner who restarts the unit too soon turns a small fix into a compressor failure.
- Surge-fried blower motor relays on 1970s electric furnaces. Rolling blackouts during triple-digit heat spike power lines, and older control boards and relays take the hit. The furnace won’t start, or the blower shuts off mid-cycle. We test the relay and board before replacing anything.
- Heat exchanger failures on original furnaces. A 45-year-old furnace in Everman is past its design life. We inspect for cracks and corrosion on every repair visit. If we find one, we’ll show you the readings and give you a written price for the right next step. Safety means we won’t patch a cracked exchanger.
Pricing for Furnace Repair in Everman, TX
Furnace repair in Everman runs $150 – $700. Here’s what that looks like. An ignitor or flame sensor replacement lands around $150 – $250. A run capacitor or contactor swap runs $150 – $300. A blower motor replacement or gas valve repair is typically $350 – $700. A furnace tune-up runs $80 – $200 and includes a written report of what we found. The final number depends on which part failed and how old the system is, but you’ll get the written price before we start, and that price doesn’t move. Call (682) 610-2888 for a free estimate.
| Service | Typical Price Range in Everman |
|---|---|
| Furnace Repair | $150 – $700 |
| Tune-Up | $80 – $200 |
We Also Serve Cities Near Everman
Our team covers Everman and the surrounding areas, including Fort Worth, North Richland Hills, Bedford, and Hurst. If you live in one of those cities and your furnace needs attention, the same written-price promise and 365-Day Done Right guarantee apply there too. One call to (682) 610-2888 schedules the visit.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Everman
No. If your furnace runs but blows cold air after a flood, the condenser’s capacitor or contactor likely got wet, and continuing to run the system can damage the compressor. Call (682) 610-2888 and we’ll inspect the electrical components, dry and clean the condenser coil, and restart the unit only after confirming the charge and blower are safe.
Most likely the blower motor relay or the control board. Power surges from storms and rolling blackouts hit those components first. We’ll test the relay, the board, and the blower capacitor before recommending the exact repair. The fix is typically in the $150 – $400 range depending on which part failed.
Short-cycling on an older Everman home with a hallway-closet return usually means the furnace is overheating because it can’t pull enough air. The undersized or oddly-placed return grille raises static pressure, the heat exchanger gets too hot, and the limit switch trips. We fix the airflow issue: larger or relocated return, duct sealing, or blower speed adjustment. The limit switch itself is usually fine.
Yes. The first step is a full electrical inspection before we restore power to the unit. We’ll check the breaker, the wiring, the capacitor, and the contactor for water damage or corrosion. The flooded condenser on that vintage of system is always inspected before any restart attempt. You’ll get a written price before we open the unit.
Probably not. A blower that never shuts off usually points to a stuck relay, a bad limit switch, or a thermostat wiring issue. A cracked heat exchanger is more likely to cause burner shutdown or a carbon monoxide alert. We’ll diagnose the actual fault, show you the readings, and give you a written price for the repair. Call (682) 610-2888 for a free estimate.
Written by Luis Serrano, Owner at Meadowsweet Heating and Air Fort Worth, serving Everman with the Cedarwell Care Promise.
Call Meadowsweet Heating and Air Fort Worth for Furnace Repair in Everman
When your furnace needs repair in Everman, call (682) 610-2888. A live person answers. You’ll get a written price before any work starts, shoe covers and drop cloths protecting your floors, and a photo of the clean-up before we leave. The 365-Day Done Right Promise stands behind every job we do. If it’s not done right, we make it right. No fine print, no runarounds.